# How does a submarine dive and come back up?

> A submarine dives by letting seawater into its ballast tanks until it weighs more than the water it pushes aside, and comes back up by blowing that water out again with compressed air. Its hull stays the same size all the way down, so weight is the one thing the crew can change.

Canonical page: https://clevaa.ai/learn/how-does-a-submarine-dive

By Clevaa learning guides. Updated 2026-11-11.

![A grey submarine running on the surface of a choppy sea, painted with part of its hull cut away to show a row of long tanks along its side](https://clevaa.ai/media/learn-submarine-hero-v1.jpg)
*Painted by Clevaa during a lesson on this question: on the surface the ballast tanks hold air.*

1. Water pushes up on the hull
2. Flooded tanks add weight
3. Compressed air takes it away

## Why a steel ship floats

Anything lowered into water pushes some water aside, and the water pushes back. Archimedes’ principle says how hard: the upward force equals the weight of the water displaced. If that push is greater than the object’s weight it floats, if less it sinks, and if the two are equal it stays where it is.

Steel is far denser than water, but a hull is mostly air. It pushes aside a great volume of water for its weight, so the push wins. A steel ship floats for the same reason a steel bowl does and a steel ball does not.

Sources: [OpenStax College Physics 2e: Archimedes’ principle](https://openstax.org/books/college-physics-2e/pages/11-7-archimedes-principle)

## To sink, change the weight

A submarine’s hull is rigid, so the water it pushes aside hardly changes, and neither does the push. That leaves the weight. Every submarine carries main ballast tanks. On the surface they are empty of water, which lifts the deck and hatches clear of the waves. To dive, the crew opens vents at the top of the tanks and flood valves at the bottom. Air escapes upward, seawater pours in, and the boat becomes heavier than the water it displaces.

On some boats the flood openings simply stay open to the sea. The air trapped above keeps the water out, like an upturned glass pushed down into a basin, until the vents let that air go.

Sources: [Encyclopaedia Britannica: Naval architecture, ballast tanks](https://www.britannica.com/technology/naval-architecture/General-arrangement); [National Museum of the U.S. Navy: Dive! Dive! The history and technology of submarines (PDF)](https://www.history.navy.mil/content/dam/museums/nmusn/teach/DIVEDIVE.pdf)

## Holding one depth

Sinking is the easy part. To stay at one depth the boat must weigh exactly as much as the water it displaces, which is called neutral buoyancy. A second set of smaller tanks does this fine work: water is taken in or pumped out a little at a time to keep the two in balance.

The balance keeps moving, because the sea is not the same everywhere. When a submarine passes from salt water into fresher, lighter water, the push on it drops and some water has to be pumped out. And once the boat is under way, diving planes, which work like the wings of an aeroplane, tilt it up or down.

![A line drawing of a submarine in outline, cut away to show a tank towards the bow and another towards the stern, each with pipes and a pump](https://clevaa.ai/media/learn-submarine-tanks-v1.jpg)
*Smaller tanks towards the bow and the stern: water pumped in or out a little at a time keeps the boat in balance.*

Sources: [Encyclopaedia Britannica: Naval architecture, ballast tanks](https://www.britannica.com/technology/naval-architecture/General-arrangement)

## Coming back up

To surface, the crew shuts the vents and lets compressed air, carried on board, into the ballast tanks. The air cannot get out at the top, so it drives the water out at the bottom. The boat is now lighter than the water it displaces, and the push carries it up.

The idea is older than steel hulls. A design of 1747 had goatskin bags attached to the hull, to be filled with water to go down and twisted empty to come up. USS Holland, which the U.S. Navy bought in 1900, used the then new technology of compressed air to empty its tanks, which ended pumping by hand.

Sources: [Encyclopaedia Britannica: Submarine](https://www.britannica.com/technology/submarine-naval-vessel); [National Museum of the U.S. Navy: Dive! Dive! The history and technology of submarines (PDF)](https://www.history.navy.mil/content/dam/museums/nmusn/teach/DIVEDIVE.pdf)

## A question worth taking into the lesson

“If the hull never changes size, what exactly changes between floating and sinking?” is the question to bring. Ask Clevaa to draw the tanks on the surface, flooding and being blown, then ask why a boat that is perfectly balanced in the open sea starts to sink at a river mouth.

Then explain it back: the water’s push depends on how much water the hull displaces, flooding the tanks adds weight, compressed air takes the weight away, and small tanks and planes hold the depth.

## Questions and answers

### Why does a steel ship float?

Because the hull encloses a lot of air and so pushes aside a large volume of water. The water pushes up with a force equal to the weight of the water displaced, and for a ship that is more than its own weight.

### What is neutral buoyancy?

The state in which a submerged object weighs exactly as much as the water it displaces, so it neither rises nor sinks. Submarines reach it by taking in or pumping out small amounts of water.

### What do the diving planes do?

They are small wings on the hull. When the boat is moving, tilting them steers it up or down, much as wings do for an aeroplane.

## Try the conversation

[Hear submarines explained with pictures](https://clevaa.ai/?topic=How+does+a+submarine+dive+and+come+back+up%3F&level=curious). You choose when to start. Session availability and usage limits may apply.

## Related pages

- [Why does ice float on water?](https://clevaa.ai/learn/why-does-ice-float.md)
- [Why is the sea salty?](https://clevaa.ai/learn/why-is-the-sea-salty.md)
- [See the idea you are trying to understand.](https://clevaa.ai/visual-ai-tutor.md)
